Features:
▪ Temperature monitoring, amplifier power, current, voltage monitoring and detection
▪ Device identification, remote power on/off, DSP control, networking and debugging
▪ Support DANTE, AES, analog input, with priority selection, digital and analog backup
▪ Freely set power, current limiting and voltage limiting, real-time impedance detection
▪ Dante and control signals go hand in hand
▪ Standard 4-channel FIR function, 4 x 2048 TAPS
▪ Equipped with 4.3 inch IPS capacitive touch screen
▪ USB drive-free, support GPIO
▪ Dual RJ45 interface/TCP protocol, the same network port can be used for data and control
▪ Constant voltage and constant resistance support: 100V, 70V, 8 ohms, 4 ohms
▪ Wide voltage operation, support 180/264VAC
▪ Dante network audio (optional)
▪ Available for central control
Specifications:
Minimum output impedance 4Ω per channel
Input interface Balanced input 4*XLR
Output interface 4*Spoken;4*binding posts
Maximum input level 20dB
Sensitivity 12dBu, 6dBu, 0dBu
Signal-to-noise ratio 103dB
Frequency Response 20Hz ~20kHz (±0.5dB) @1W, 8Ω
THD+N <0.08%@1W, to full power
Sampling rate 48k/24bit
Constant voltage and constant resistance 100V, 70V, 8Ω, 4Ω
Dante (optional) 4-channel Dante
Display 4.3-inch IPS capacitive touch screen
Protection Audio limiter, high temperature, DC, high frequency, short circuit, back EMF, peak current limiter, inrush current limiter, power-on delay, power circuit breaker protection, power supply over/under voltage protection
PC software Software can control media matrix, audio processor, DSP power amplifier, active DSP module
Power supply voltage input 180/264VAC
High Definition Pictures：
Brochure/Data Sheet：
Operation Manual：